Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002     

Extraction of humic acids from a natural matrix by alkaline pyrophosphate. Evaluation of the molecular weight of fractions obtained by ultrafiltration

 Fractions of humic acids, resolved by ultrafiltration of extracts from a sample of peat treated with alkaline pyrophosphate solution, have been submitted to high-performance size-exclusion chromatography, with the aim of determining the molecular weight distributions. Anomalous peaks, located at retention volumes higher than those corresponding to the main signal, are present in the elution profiles relative to the lightest fractions. These peaks are more intense when using a refractive index detector rather than a UV detector. Elemental analysis data for the lightest fractions suggested that the spurious peaks are due to the presence of inorganic material. The hypothesis that pyrophosphate interacts with humic acids in the course of the extraction has been confirmed by colorimetric determination of the phosphorus content in the different fractions. As a consequence, the extraction procedure has been modified by using 0.1 mol/L NaOH as extractant. The average molecular weights of the various fractions, following NaOH extraction, result in substantial agreement with those obtained following pyrophosphate solution extraction (if the ‘pyrophosphate peaks’ present in the chromatographic profile are discarded in the calculations). Received: 18 November 1996 / Revised: 18 February 1997 / Accepted: 23 February 1997     

Can the pi-facial selectivity of solvation be predicted by atomistic simulation?

This work is concerned with the rationalization and prediction of solvent and temperature effects in nucleophilic addition to alpha-chiral carbonyl compounds leading to facial diastereoselectivity. We study, using molecular dynamics simulations, the facial solvation of (R)-2-phenyl-propionaldehyde in n-pentane and n-octane at a number of temperatures and compare it with experimental selectivity data for the nBuLi addition leading to syn- and anti-(2R)-2-phenyl-3-heptanol, which give nonlinear Eyring plots with the presence of inversion temperatures. We have found from simulations that the facial solvation changes with temperature and alkane. Moreover, by introducing a suitable molecular chirality index we have been able to predict break temperatures (T(CI)) for the two solvents within less than 20 degrees of the inversion temperatures experimentally observed in the diastereoselective nBuLi addition. We believe this could lead to a viable approach for predicting inversion temperatures and other subtle solvent effects in a number of stereoselective reactions.     

Complexes self‐associate by hydrogen bonding and metallophilic attraction: Theoretical study

Hydrogen bonding and metallophilic attractions are studied in the model systems: [(AuNH₃Cl)₂], [(AuNH(CH₃)₂Cl)₂], [{Au₂(μ‐SH)(PH₂O)(PH₂OH)}₂], [(CuNH₃Cl)₂], and [{Cu(NH₃)Cl}₄] at the Hartree–Fock (HF) and second‐order Møller–Plesset (MP2) levels. The two interactions are found to be comparable and prevailing in the final structure. It is determined that the aurophilic contact has a same magnitude that the hydrogen bonding, and is stronger than the cuprophilic interaction. The presence of hydrogen bond directs the growth of the crystal. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Formation of a nanostructured layer on bioglass particles of different sizes immersed in tris-buffered solution. N2 adsorption and HR-TEM/EDS analysis

Morphological and structural variations of particles of Bioglass with two different grain sizes reacted in Tris-buffered solution were analyzed by means of N(2) adsorption/desorption at 77 K and HR-TEM/EDS. A remarkable increase in specific surface area (ssa) was observed after the first hour of dissolution. A plateau value corresponding to an increase of at least 2 orders of magnitude was reached after 2 days of dissolution. The ssa increase was faster for the smaller particle size sample, and the ratio between the ssa of the starting samples was not maintained during dissolution. Both micro- and mesopores were formed at different stages of the reaction for the two samples. Increasing ssa was also connected to the formation of a microcrystalline structure rich in Ca and P, as shown by TEM images. The segregation of both a SiO(2)-rich amorphous phase and a Ca/P-rich crystalline phase was observed after the first hour of dissolution. After 2 days of reaction, Ca/P-rich particles made of fine aciculate crystals were found either in close contact with SiO(2) particles or deposited on a small SiO(2)-rich core. A preliminary analysis of TEM data showed the formation, together with hydroxy carbonate apatite, of different types of calcium phosphates not detectable by powder X-ray diffraction.     

Analysis of nitriles at low parts per million levels by capillary gas chromatography

Two methods have been developed for the determination of trace levels of acetonitrile and propionitrile in light naphthas. One involves clean-up and preconcentration by medium pressure liquid chromatography (MPLC) in which nitriles are concentrated ten-fold while the complex hydrocarbon matris is removed. The concentrated solution is then analyzed by high resolution GC with flame ionization detection. The second method involves direct injection of samples into a capillary GC equipped with chemiluminescence nitrogen detection. The results and repeatability obtained from both methods are comparable. Preconcentration enables identification by GC-MS and simultaneous analysis of other polar species, with no need for selective detectors. Direct analysis is, on the other hand, much less time-consuming and requires less sample.     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.     

Reagents and synthetic methods 55. New methods for the preparation of t-butyldimethylsilyl triflate and trimethylsilyl triflate.

An expeditious synthesis of t-butyldimethylsilyl triflate is described from triflic acid and t-butyldimethylsilane. Reaction between trichloromethyltrimethylsilane and triflic acid is also reported.     

Why is the partial molar volume of CO2 so small when dissolved in a room temperature ionic liquid? Structure and dynamics of CO2 dissolved in [Bmim+] [PF6(-)

When supercritical CO2 is dissolved in an ionic liquid, its partial molar volume is much smaller than that observed in most other solvents. In this article we explore in atomistic detail and explain in an intuitive way the peculiar volumetric behavior experimentally observed when supercritical CO2 is dissolved in 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim+] [PF6(-)]). We also provide physical insight into the structure and dynamics occurring across the boundary of the CO2 ionic liquid interface. We find that the liquid structure of [Bmim+] [PF6(-)] in the presence of CO2 is nearly identical to that in the neat ionic liquid (IL) even at fairly large mole fractions of CO2. Our simulations indicate, in agreement with experiments, that partial miscibilities of one fluid into the other are very unsymmetrical, CO2 being highly soluble in the ionic liquid phase while the ionic liquid is highly insoluble in the CO2 phase. We interpret our results in terms of the size and shape of spontaneously forming cavities in the ionic liquid phase, and we propose that CO2 occupies extremely well-defined locations in the IL. Even though our accurate prediction of cavity sizes in the neat IL indicates that these cavities are small compared with the van der Waals radius of a single carbon or oxygen atom, CO2 appears to occupy a space that was for the most part a priori "empty".     

Chemical waves and pattern formation in the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/water lamellar system

The present work deals with the spatially extended oscillatory Belousov Zhabotinsky reaction-diffusion system carried out in an anisotropic environment of phosphatidylcholines/water binary system, which presents layered aqueous domains separated by lipid bilayers. We report the occurrence of stable Turing patterns, spiral waves, and other exotic structures in phospholipids bilayers that are generally used as a models for cell plasma membranes.